ictor S range of self priming pumps are suitable for pumping corrosive and/or abrasive & viscous liquids that are compatible with cast iron, bronze, aluminum or stainless steel, which can contain air.
The pump can be located above, on side or under the liquid. Some pump sizes can self-prime up to the physical limit of 8 m.
Available with various drives such as single phase, three-phase, explosion-proof motors and gasoline or diesel engine.
Produced in different versions depending on the specific application. Also with ATEX Certificate. 
Typical Applications would include: –
|
|
|
 |
 |
 |
 |
 |
 |
| Threaded ports BSP-NPT (1″-4″). | Counter flanges to weld (standard for 6″ & 8″). | Flanged ports DIN-ASA with ¼” threaded holes for Vacuum-meter and Manometer. |
Wear plates for abrasion. | Heavy-duty open impeller designed for passage of solids. |
Impeller & the wear plate with cutter device for soft solids. |
 |
 |
 |
 |
 |
 |
| Priming cover. | Inspection cover. | Cover with zinc anodes for sea water. | Non-return valve: avoids a backflow of the liquid from the discharge side and reduces priming times. Available in NBR, FKM, PTFE or EPDM. |
Clean out cover. | Clean out cover with ball valve. |
 |
 |
 |
 |
 |
 |
| Bearing housing with maintenance free ball bearings. | Mechanical seal available in different materials. | Automatic grease lubricator (+PS). | External seal flushing in front of the mechanical seal. |
Metal bellows mechanical seal. | Seal-less with magnetic coupling. (magnetic Drive). |
| Discharge Size | |
|---|---|
| Manufacturer | |
| Max Flow | |
| Max Head | |
| Motor kW P2 | |
| Suction Size | |
| Availability | |
| Condition | |
| Google product category (GB) |
