Speroni RVM 40 230V Multistage Pump

Description

Speroni RV RVM Vertical Multistage Pumps are non-self-priming, vertical multi-stage pumps manufactured with 304 stainless steel pump casings and cast iron pump bodies and cast iron motor supports. The Impellers and diffusers are manufactured from thermoplastic. Thepumps are fitted with 304 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. Motor frame and supports are in aluminium and the fan covers are in steel. Motor protection is IP55. Single phase motors incorporate an overload protection device. They can develop high pressures and lifts from comparatively small motors and operate virtually silent, hence they are suitable for many domestic, industrial and horticultural applications. They are designed for pumping clean water only up to a maximum of 35ºC.

Click on the photo’s below for available accessories

Pump Specifications

• Liquid temperature up to 35°C (for home use according to EN 60335-2-41)
• Temperature max. liquid: 35°C (for other uses)
• Ambient temperature up to 40°C
• Total suction lift up to 7 mt
• Continuous duty

Motor Specifications

• Two-Pole induction motor (n = 2850 min-1)
• Insulation Class F
• Protection IP 55

Materials of Construction

• Pump body Cast Iron
• Motor Support Cast Iron- Impeller Noryl
• Diffuser Noryl
• Pump casing Stainless Steel AISI 304
• Shaft with rotor Stainless Steel AISI 304
• Mechanical seal Silicon/Silicon/NBR0404

Additional information

Download PDFs for Speroni RVM 40 230V Multistage Pump

• Speroni RVM 40 230V Multistage Pump (RV_RVM_40_50_60_80__Data_Sheet.pdf, 5.60 KB) - Download
• Speroni RVM 40 230V Multistage Pump (RVM_Instructions.pdf, 5.54 KB) - Download
• Speroni RVM 40 230V Multistage Pump (RVM40.pdf, 5.49 KB) - Download