£0.00 ex. VAT / £0.00 incl. tax
Sacemi AU56 400V Immersion Pump
Sacemi AU Immersion Pumps are uitable for the transfer of clean liquids, containing impurities not exceeding 0.03 mm. The hydraulic components: brass impeller, cast iron bottom and aluminium pump body, allow it to be used with emulsions, oily substances and liquids in general as long as they are not oxidizing for the construction materials. The viscosity must not exceed 21 cSt (3 ° Engel).
Viscosity must not exceed 3° Engler (21 CST).
They must be installed at the top of the tank and must be primed before use. If the pump sucks in air due to lack of liquid, priming must be repeated. To ensure a long life for the pump, never let it turn when it is dry since the mechanical seal is not self-lubricated.
Where possible, the installation of a suction filter is recommended.
