£0.00 ex. VAT / £0.00 incl. tax
Sacemi EPC80B 360mm 400V Immersion Pump
Sacemi EPC Immersion Pumps are suitable for the transfer of clean liquids, containing impurities no larger than 0.03 mm. The hydraulic components: brass impeller, cast iron scroll and pump body, allow it to be used with emulsions and oily substances, glycol and liquids in general, as long as they are not oxidizing for the construction materials. The viscosity must not exceed 21 cSt (3 ° Engel). The liquid temperature must not exceed 90 ° C.
Boring centres
Cooling exchanges
They should usually be installed on a tank, with a capacity in proportion to the flow rate, at about 3-4 cm. from the bottom. It is important to check that the maximum level of the liquid in the tank always remains 3 – 4 cm. lower than the flange (see figure).
For other usages you are advised to consult our technical office.
