£0.00 ex. VAT / £0.00 incl. tax
Sacemi SPV150 200mm 400V Immersion Pump
Sacemi SPV Immersion Pumps are suitable for the transfer of liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body in PBT, allow it to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3 ° Engel). The liquid temperature must not exceed 70 ° C.
Machine tools (milling machines – lathes – drills)
Glass processing machines (TRI version)
Printing machines (axis in AISI 420-304 – PBT on draught 270 mm.)
Air-conditioning systems
Filtration systems
They should usually be installed on a tank, with a capacity in proportion to the flow rate, at about 3 – 4 cm. from the bottom. It is important to check that the maximum level of the liquid in the tank always remains 3– 4 cm. lower than the flange (see figure).
In cases where the liquid is particularly dirty, the user is recommended to construct the tank in compartments to allow the dirt to deposit before it is stirred up by the pump.
| Weight | 15.0 kg |
|---|---|
| Control Voltage | |
| Discharge Size | |
| Manufacturer | |
| Max Flow | |
| Max Head | |
| Motor kW P2 | |
| Model Range | |
| Stem Length | |
| Availability | |
| Condition | |
| Google product category (GB) | |
| MPN | SPV150.200MM.415V |
